Table of Contents
Keynote Papers

Prospects of shipbuilding in Bangladesh
Dr. Abdullahel Bari (Ananda Group)

xiii

Van Gogh, Gauguin, Fluidity and the gap in engineering education
Prof. Dr. Sander Calisal, Turkey

xxiii

On the prediction of ship performance in actual sea conditions using computational fluid dynamics
Dr. Hiromichi Akimoto, Japan

xxxi

Hull form parameterization technique with local and global optimization algorithms
Prof. Dr. Ho Hwan Chun, Korea

xxxv

History, sate-of-the-arts and future trend of research on ship manoeuvrability and controllability
Prof. Dr. Kazuhiko Hasegawa, Japan

li

A holistic view on ballast water management
Prof. Dr. Ehsan Mesbahi, UK

Technical Papers

Numerical study of free surface effect on the flow around shallowly submerged hydrofoil
Md. Ashim Ali & Md. Mashud Karim

1-6

Experiment of bended hydrofoil-supported ocean structure pillar
M A Djabbar & Juswan

6-11

Investigation on the stability of a trimaran wing in ground effect (WIG) craft with endplate
Adi Maimun, Agoes Priyanto, Noverdo Saputra, Saaed Jamee, Ike Suharti, Md.Mobassher

13-19

Development of a ship weather-routing algorithm for specific application in north Indian ocean region
Debabrata Sen & Chinmaya P Padhy

21-27

Computational study on the fish-like underwater robot with two undulating side fins for various aspect ratios, fin angles and frequencies
Md. Mahbubar Rahman , Yasuyuki Toda & Hiroshi Miki

29-34

Assessment of marine propeller hydrodynamic performance in open water via CFD
Mehdi Nakisa, Mohammad Javad Abbasi, and Ahmad Mobasher Amini

35-44

Sustainable growth in inland waterways of Bangladesh through Innovation: A Way Forward
Arun Kr Dev

45-52

Aerodynamic characteristics of a compound wing during ground effect
Saeed-Jame, Adi-Maimun, Agoes-Priyanto & Nor-Azwadi

53-60

Dynamic response of offshore triceratops under environmental loads
Srinivasan Chandrasekaran, Madhuri Seeram, A. K. Jain & Gaurav

61-66

Preliminary feasibility study and development Coastal region of Ambon city as Ambon water front city in supporting potentials and regional competitiveness
Pieter Berhitu, Wilma Latuny & Marthin Efruan

67-72

Modeling of gas turbine co-propulsion engine to ecotourism vessel to improved sailing speed up to 35 knots
O. Sulaiman1, O.S. Han, W.B. Wan Nik, A. H. Saharuddin, A.S.A.kader & M.F. Ahma

73-80

Qualitative method for antifouling long life paint for Marine facilities or system
O. Sulaiman, C.M.Sam, W.B. Wan Nik, A.S.A.kader & A. H. Saharuddin

81-88

Hatch cover analysis of capsize bulk carriers and suggestions for alternate materials
K. Kunal, C. Kannan & S. Surendran

89-94

A study on numerical analysis of unsteady cavitaing flow over two dimensional hydrofoils
N. Mostafa, M. M. Karim & M. M. A. Sarker

95-100

Static and dynamic analysis of semi-submersible type floaters for offshore wind turbine
A.C.Mayilvahanan & R.Panneer Selvam

101-106

Experimental investigation of slamming loads on a wedge
Tanvir Mehedi Sayeed, Heather Peng & Brian Veitch

107-112

Numerical investigation of bow slamming on ships with large flare
Rahaman Md. Mashiur, Kun Zheng & Akimoto Hiromichi

113-121

Drag analysis of different ship models using computational fluid dynamics tools
Salina Aktar , Dr. Goutam Kumar Saha & Dr. Md. Abdul Alim

123-129

Dynamic response behaviour of multi-legged articulated tower with & without TMD
Srinivasan Chandrasekaran, Bhaskar K, Lino Harilal and Brijith R

131-136

Investigation of the response of a boxed shaped free floating buoy in linear water waves
Muammer Din Arif, M. Rafiqul Islam, A. K. M. Sadrul Islam &, Enaiyat Ghani Ovy

137-142

Role of bank protective works at upstream in improving siltation at downstream: case study in the Jamuna with application of numerical model
Masum Ur Rahman & Sarwat Jahan

143-147

Thermomechanically treated advanced steels for structural applications
M.A. Islam

149-153

Computational drag analysis over a car body
M. M. Islam & M. Mamun

155-158

An experimental analysis of the internal flow effects on marine risers
Motohiko Murai & Marcio Yamamoto

159-165

Wind sail analysis using computational fluid dynamics simulation
A Sulisetyono, A Nasirudin & FA Wibowo

167-173

Corrosion behaviour of aluminum alloy in seawater
W. B. Wan Nik, O. Sulaiman, A. Fadhli & R. Rosliza

175-180

Hydrodynamic calculation and effects of deadrise angle on the planing crafts
Hassan Ghassemi, Saman Kermani & Abdollah Ardeshir

181-187

Max-plus approach to scheduling problems of block assembly lines
Hiroyuki Kajiwara, Yasuhiro Hitoi & Khairul Hassan

189-194

Optimization of the preliminary design parameters and cost evaluation of container vessel for the inland waterways of Bangladesh.
Goutam Kumar Saha, Golam Mortuja & Md. Emdadol Haque

195-200

Passing ship effects on a moored ship: A numerical Study
Md. Nazrul Islam, M. Rafiqul Islam & Md. Sadiqul Baree

201-207

Effect of diameter of heated block on MHD free convection flow in a cavity
Salma Parvin & Rehena Nasrin

209-213

An environment friendly method of driving ships with air jet propulsion
Mohammad Jiaur Rahman

215-220

Motion responses and incident wave forces on a moored semi submersible in regular waves
Hassan Abyn, Adi Maimun, M. Rafiqul Islam & Dr. Allan Magee

221-226

Prediction of manoeuvring behaviour of an offshore supply vessel by using simulation program
Che Wan Mohd Noor, Abdul Majeed Muzathik, Wan Mohd Norsani Wan Nik, Mohammad Fadhli Ahmad, Khalid Samo & Rajoo Balaji

227-232

Prediction of manoeuvring behaviour of an offshore supply vessel by using simulation program Various aspects of sound ship recycling in South Asia: A compromise not a confrontation
Arun Kr Dev

233-240

Role of acids in the degradation of alkanolamine during CO2 and H2S removal process
Md. Sakinul Islam, Rozita Yusoff & Brahim Si Ali

241-247

Assessment of ship manoeuvrability in shallow waterways
Osman Md. Amin & Kazuhiko Hasegawa

249-253

Probabilistic evaluation of plate effectiveness in terms of effective width of attached plating
S. C. Vhanmane & B. Bhattacharya

255-263

Techno economic study of potential using solar energy as a supporting power supply for diesel engine for landing craft
O. Sulaiman, H.Aron, , A. H. Saharuddin ,W.B. Wan Nik, A.S.A.kader & M.F. Ahmad

265-269

Numerical investigation on natural convection from an open rectangular cavity containing a heated circular cylinder
Sheikh Anwar Hossain & Dr. M. A. Alim

271-278

A numerical study on hydrodynamic interaction for a small 3-D body floating freely close to a large 3-D body in waves
Mir Tareque Ali, Md. Mashiur Rahaman & Tasnuva Anan

279-284

An investigation of ship performance in seas
M.S. Baree

285-290

MHD-conjugate free convection flow from an isothermal horizontal cylinder with stress work
NHM. A. Azim, ATM. M. Rahman & M. K. Chowdhury

291-296

Ship recycling prospects in Bangladesh
Kh. Akhter Hossain, K. Shahriar Iqbal & N. M. Golam Zakaria

297-302

Conceptual framework for the evaluation of container terminal’s expansion by marginal approach
K.B.Loke, A.S.A.Kader & A.M.Zamani

303-310

An alternative structural design for tankers
Mohammad Ashickur Rahman Khan

311-316

Development of G-code from CAD model for rotational parts
Md. Deloyer Jahan

317-322

Effects of temperature dependent thermal conductivity and viscous dissipation on conjugate free convection flow along a vertical flat plate
ATM. M. Rahman, NHM. A. Azim, M. M. Rahman & M. K. Chowdhury

323-328

Effect of temperature dependent viscosity inversely proportional to linear function of temperature on magnetohydrodynamic natural convection flow along a vertical wavy surface
Nazma Parveen & Md. Abdul Alim

329-334

Development of an intelligent system for monitoring the ship engine room using mobile phone
Badrun Nahar , Md. Liakot Ali & Md. Sharfaraj Hussain

335-339

Cross-shore sediment transport due to wave: A laboratory study
Badal Mahalder and Umme Kulsum Navera

341-346

An object oriented approach to beam analysis
M. S. Islam, G. M. Khalil & N. A. Nahian

347-350

IMO ballast water convention and enforceability of G2
Oihane Cabezas-Basurko & Ehsan Mesbahi

351-357

Three dimensional MHD flow with heat and mass transfer through a porous medium with periodic permeability and chemical reaction
N. Ananda Reddy, S. Vijaya Kumar Varma & M. C. Raju

359-364

Estimation of sway, heave and roll of a moored floating breakwater due to interaction with waves
Md. Ataur Rahman & Silwati Al Womera

365-369

Safety strategy for Ro-Ro passenger ferries operating on Indonesian waters
Sunaryo, Antoni Arif Pribadi & Tri Tjahjono

371-375

Effects of temperature dependent thermal conductivity on MHD free convection flow along a vertical flat plate with heat generation and joule heating
A.K.M. Safiqul Islam, M. A. Alim & ATM. M. R. Sharker

377-385

Selecting of diesel engine for heavy weather service in inter islands trade in Indonesia seawater
Yusuf Siahaya

387-391

A practical approach to triangulation of planar surface
Md. Shahidul Islam, Naem-Ibne-Rahman & Md. Mezbah Uddin

393-398

Numerical-experimental modelling of a planning vessel’s dynamics in regular waves
A.Najafi, S.Hamzeh, S.Kalanari & M.S.Seif

399-406

Study of incorporating kite or balloon technology to UMT research boat
M.Azlan Musa, S.S. Ilmin, W.B. Wan Nik & A.M. Muzathik

407-411

Study on some competitive parameters for shipbuilding industry in Bangladesh
N. M. Golam Zakaria, M.M. Rahaman & Kh. Akhter Hossain

413-418

Numerical prediction of wave-making resistance of tetramaran hull in unbounded water
Md. Shahjada Tarafder, Gazi Md. Khalil1 & Md. Shahriar Nizam

419-425

Sustainable container ship for inland shipping in Bangladesh
K. Shahriar Iqbal, N. M. Golam Zakaria, M. Imran Khaled & M. Milon Khan

427-432

Effect of curvature on entry flow
M. A. Masud & Md. Mahmud Alam

433-438

Response of a containership AT outer anchorage
B.Rajesh Reguram, Sajjan S.C & S.Surendran

439-444

Reconstruction of capsize type of accidents by fault tree analysis
M.T. Hossain, Z.I. Awal & S. Das

445-452

A study on pullout capacity of horizontal and inclined plate anchors for offshore installations
Baleshwar Singh, Birjukumar Mistri & Ravi Patel

453-458

Effect of FGM coating on thermoelastic characteristics of a rotating circular disk
A. M. Afsar & F. A. Sohag

459-464

An experimental study of two-phase looped thermosyphon
A. K. Azad, S. K. Sarkar, C. M. Feroz & M. M. Alam

465-469

Optimization of ship hull parameter of inland vessel with respect to regression based resistance analysis
Goutam Kumar Saha & Asim Kumar Sarker

471-476

A theoretical method for the design of marine tandem propellers
Dr. Muhammad Refayet Ullah

477-482

Design and dynamic behaviors of marine structures
Yoshiyuki Inoue

483-491

Analysis and improvement in performance characteristics of Francis turbine
S. Hari Narayanan & Sri Saila Mallikarjunan K V

493

Application of kite and its effect on reduction of fuel consumption and marine environmental protection in ships
M. Sayehbani, M. Ghiasi & S. Dehesh

494

A concept selection of strait- crossing systems : a case in Sunda strait
Daniel Mohammad Rosyid

495